1.5 Million Pound Press Relocation

Project Scope for 1.5 Million Pound Press Relocation for Auto Manufacturer:
Disassemble stamping press and robot lines, palletize, label for
reassembly, and load on super heavy haul trucks to Alabama.

Disassemble and relocate 1.5 Million pound stamping press from Ohio to Alabama. The move required a 600 ton gantry system, Custom 12”x12” cribbing 200’ long landing, and super heavy haul trucks that could handle 300K# per load.

“Wow, how did you get the stamping head off? The head was almost flush to the ceiling! – Customer

Scope of Work

1.5M LB

Heavy Machine Moves

Heavy Machinery Moving
Disassemble, label, and move 1.5M lb Fagor
stamping press for reassembly in Alabama
including catwalks.

  • Remove Catwalks
  • Disassemble press into shippable parts


Cribbing Landing

Custom Cribbing
Deliver and install custom 200’ hardwoord
cribbing runway to support the gantry runway
system and move the press pieces to the truck
loading zone.

  • 200’ linear runway
  • +28,000 board feet
  • 12”x12” nominal hardwood

300K+ LB

Super Heavy Haul Trucks

Heavy Trucking
Alltracon loaded multiple super heavy haul
trucks for delivery to new Alabama plant.

  • 300,000 pound capacity truck
  • Multi-state permitted heavy haul loads

Subscribe To Our Newsletter!